€0.00
Menu
InstantHot 3000W Instant Hot Water Tap with LCD Display
20% off

No storage tank

Water is heated as it flows, so no under-sink boiler tank is required.

Real-time temperature

The integrated LCD display shows the current outlet-water temperature.

Made for difficult locations

Useful where bringing a conventional hot-water line to the sink would be inconvenient or expensive.

InstantHot 3000W Instant Hot Water Tap with LCD Display

Shipping from stock

SKU:PW2928

Be first to review

FAQ

Lowest price in previous 30 days: €30.00

Sale price: €24.00

You save: €6.00 (20%)

Sale price valid until: 13.11.2026.

InstantHot is a compact 3000 W electric flow-through hot water tap designed for sinks where no central hot-water connection is available. Water is heated only while it flows, while the LCD display shows the current outlet temperature. A 360° rotating spout, single-handle flow control and standard 1/2-inch water connection make it practical for kitchens, utility rooms, workshops, holiday homes and other locations that need hot water without a storage tank.
Offer ends in
00Days
00Hours
00Minutes
00Seconds
3000 W • Tankless • LCD Display • 360° Spout

Hot water where no hot-water pipe is available

A compact solution for kitchens, workshops, holiday homes and secondary sinks — heating water only when you open the tap.

3000 W • LCD Temperature Display • 360° Spout • Tankless

InstantHot 3000W Instant Hot Water Tap with LCD Display

Hot water directly at the sink — without installing a storage boiler. InstantHot heats water as it flows through the tap and shows the current temperature on its integrated LCD display.

3000 W instant heating

The heating element operates only when hot water is requested, so there is no tank to keep permanently heated.

LCD temperature display

See the current outlet-water temperature directly on the tap while adjusting flow.

360° rotating spout

The swivel outlet makes the tap practical for kitchen sinks, utility sinks and work areas.

Single-handle control

Adjust water flow and hot/cold operation from one simple control.

Compact installation

The heating unit is integrated into the tap, saving the cabinet space required by a traditional storage water heater.

Standard 1/2-inch water connection

Designed for conventional plumbing connection to the cold-water supply.

Where InstantHot makes the most sense

  • Kitchens without a hot-water line
  • Holiday homes and cottages
  • Workshops and garages
  • Utility rooms and laundries
  • Small offices and staff areas
  • Temporary or secondary sinks
  • Renovations where adding a hot-water pipe would be expensive

30–60 °C depending on flow and inlet conditions

Matching PW2928 specifications list an outlet-water range of approximately 30–60 °C. As with all compact flow-through heaters, the final temperature depends on incoming water temperature and flow rate: reducing flow generally produces hotter water, while higher flow gives lower outlet temperature.

Important electrical and plumbing installation

This is a 3000 W mains-powered water-heating appliance. It must be installed only on an electrical circuit and water connection suitable for the appliance load and according to local electrical and plumbing regulations. The unit must be correctly earthed and protected by the required residual-current and overcurrent protection for the installation.

Simple everyday operation

  1. Open the water supply and check all connections for leaks before connecting electrical power.
  2. Turn the handle toward the required operating position.
  3. Adjust the flow until the desired temperature is shown on the LCD display.
  4. Use lower flow when a higher outlet temperature is required.
  5. Return the handle to the OFF / neutral position after use.
  6. If the appliance will not be used for a longer period, disconnect power and follow the supplied storage instructions.

Care & practical use

  • Do not operate the heater without water flow.
  • Keep the inlet filter and tap aerator clean.
  • Check hose, thread and sealing connections periodically.
  • Do not cover or modify the electrical housing.
  • Use only on a correctly grounded electrical installation.
  • Hard water can create scale inside heating components; periodic inspection and cleaning may be required depending on local water hardness.

Up-Sell Products

Customers Also Viewed

  • Product: InstantHot water tap
  • SKU: PW2928
  • Type: Electric tankless / flow-through hot water tap
  • Power: 3000 W
  • Supply: 220–240 V AC / 50 Hz according to matching PW2928 specifications
  • Temperature range: Approx. 30–60 °C, depending on inlet temperature and flow
  • Display: LCD water-temperature display
  • Spout rotation: 360°
  • Water connection: 1/2 inch
  • Working pressure: 0.04–0.05 MPa according to matching PW2928 specification
  • Ingress protection: IPX4 according to matching PW2928 specification
  • Power cable: Approx. 1.1 m according to matching PW2928 specification
  • Country of manufacture: China
  • Shipping from: Croatia
  • Warranty: 1 year
Shipping from Croatia
Warranty 1 year

Write Your Own Review

Share your experience with this product and help others choose more easily

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Price
Quality
Value

  • Example: https://www.youtube.com/watch?v=Oy5hcamHOBA

No Questions